Supaphen

The use of factory manufactured phenolic foam insulated load bearing pipe support inserts will greatly reduce the risk of condensation on cold/chilled water pipe applications, providing continuous insulation and vapour resistance as well as enhancing the thermal insulation performance of the system. Supaphen pipe support inserts are manufactured from high density phenolic insulation to suit a full range of diameters and thicknesses covering copper, steel and plastic pipes. BS5970 2012 Thermal insulation code of practice recommends the use of Insulated pipe support inserts and that the pipe support bracket be fixed over load bearing insulation of the same material (or compatible with) the insulation on the pipe. Supaphen pipe supports are supplied with a factory applied aluminium foil vapour barrier and are cut to the required length per the table below. A half metal sleeve (or full if required) is applied as standard from 48mm diameter per the table below. Supaphen pipe supports are bore coated in line with major engineering specifications.