|
Knauf Pipe Supports
Knauf Thermo-tek PH INS Pipe Hanger Supports
The Knauf Thermo-tek PH INS Pipe Hanger Support is an insulated pipe support for the reduction of thermal bridges. It consists of a compressive resistant Rock Mineral Wool core for load transfer (INS version = RMW-core only). The core is laminated with tear-resistant multi layer aluminium foil with a self adhesive overlapping seal to close the circumferential opening. Maximum service temperature 250 °C (EN ISO 18097) Service temperature aluminium facing ≤ 80 °C Density ca. 150 kg/m³ (EN ISO 18098) Application
Pipe Hangers (pipe supports) are used to take the weight load of installed pipe work at the fixing joints. Because of their low thermal conductivity they will mitigate thermal bridging to a large effect, in particular on chilled water and other ‚cold‘ lines.
Handling
Knauf Insulation products are easy to handle and easy to install. They are supplied in suitable packaging materials to balance necessary transport protection with sustainable recycling options. Packaging is not designed for long-term storage or exposure to harsh weather conditions. Further product information is mentioned on every pack.
Storage
For longer-term protection on site we recommend storing the product either indoors or alternatively under a roof cover and off the ground. If covered storage is not available, products can be stored outside (open-air-storage) if placed off the ground (keep palletized) and covered with plastic hood (foil), for a maximum of up to 6 months from the date of delivery. Outdoor storage is not recommended during particularly humid months with large fluctuations in temperature.
|
Knauf Pipe Supports
Knauf Thermo-tek PH INS Pipe Hanger Supports
The Knauf Thermo-tek PH INS Pipe Hanger Support is an insulated pipe support for the reduction of thermal bridges. It consists of a compressive resistant Rock Mineral Wool core for load transfer (INS version = RMW-core only). The core is laminated with tear-resistant multi layer aluminium foil with a self adhesive overlapping seal to close the circumferential opening. Maximum service temperature 250 °C (EN ISO 18097) Service temperature aluminium facing ≤ 80 °C Density ca. 150 kg/m³ (EN ISO 18098) Application
Pipe Hangers (pipe supports) are used to take the weight load of installed pipe work at the fixing joints. Because of their low thermal conductivity they will mitigate thermal bridging to a large effect, in particular on chilled water and other ‚cold‘ lines.
Handling
Knauf Insulation products are easy to handle and easy to install. They are supplied in suitable packaging materials to balance necessary transport protection with sustainable recycling options. Packaging is not designed for long-term storage or exposure to harsh weather conditions. Further product information is mentioned on every pack.
Storage
For longer-term protection on site we recommend storing the product either indoors or alternatively under a roof cover and off the ground. If covered storage is not available, products can be stored outside (open-air-storage) if placed off the ground (keep palletized) and covered with plastic hood (foil), for a maximum of up to 6 months from the date of delivery. Outdoor storage is not recommended during particularly humid months with large fluctuations in temperature.
|
|